Instruction manual

32
4.8 Water Connections for Model BTS
Each heater contains a kit of accessories to help the installer make the water connections.
An example of these connections and all the accessories supplied with the heater is shown
on the drawing below:
1) Ball valve (not provided) 2) Domestic hot water flow selector 3) Mixing valve (not provided) 4) ASME T-P relief valve (not provided) 5) Connections (not provided) 6) By-pass valve (not provided) 7) Domestic drain cock (not provided) 8) ASME pressure relief valve 9) Heating drain cock (not provided) 10) Domestic Hot water connections 11) Domestic Cold water connections 12) Heating Supply connections 13) Heating Return connections 14) 1" Gasket 15) 1/2" to 1" Nipple 16) 1" Nipple 17) 1/2" Gasket 18) 1/2" Nipple (not provided)
19) Line voltage cable (not provided) 20) Fitting for block cable 21) Hot water outlet 22) Cold water inlet 23) Gas supply 24) Central heating supply 25) Central heating return