Owner Manual

• Burner Caps

− To clean the burner caps, lift the burner cap off the burner head. Clean heavy soils with

an absorbent cloth.

− Rinse with a clean, damp cloth and immediately thoroughly dry including the bottom

and inside of the cap.

− Do not use harsh abrasive cleaners. They can scratch the cap.

− DO NOT PUT BURNER UNITS IN THE DISHWASHER

• Burner Heads

− The holes in the burners of your appliance MUST be kept clean at all times for proper

ignition and a complete, even flame. Remove any food from between the burner slots

using a small nonabrasive brush like a toothbrush and afterwards wipe using a damp

cloth.

− To remove deposits from the burner cavities, remove the cap and separate the two parts.

Clean the burner holes routinely with a small gauge wire or needle and especially after

bad spillovers which could clog these holes.

− After cleaning, put the two parts back together and return them correctly to their position,

making sure they are seated and level.

− DO NOT PUT BURNER UNITS IN THE DISHWASHER

• Stainless Steel

− Clean stainless steel with hot, soapy water and a dishcloth. Rinse with clean water and a

cloth.

− Do not use cleaners with high concentrations of chlorides or chlorines. Do not use harsh

scrubbing cleaners. Only use kitchen cleaners that are especially made for cleaning

stainless steel.

• Inside O

ven

− This appliance does NOT have a self-cleaning feature.

− DO NOT attempt to clean the appliance whenever the oven is still hot.

− Use an appropriate cleaning product designed specifically to clean the inside of ovens.

− IMPORTANT: Always follow label instructions on cleaning products.