Full Product Manual

Setting error
A setting error is made if the time of day on the clock falls within the cooking start and end times. To correct the
setting error, change the cooking time or cooking end time the relays switch off when a setting error is made.
Cancelling a setting
To cancel a setting, press the cooking time button and then press the –button until 00 00 appears on the display.
A set programmer will automatically cancel on completion.
How to keep Your Oven in Shape
This appliance is for household use only, don’t use it outdoors!
Important: Before cleaning your oven, or performing maintenance, disconnect it from the
power supply.
To extend the life of your oven, it must be cleaned frequently, keeping in mind that:
◎Do not use steam equipment to clean the appliance.
◎ To protect against the risk of electrical shock, do not immerse the unit, cord or plug in water or other liquid
or sprinkle water to clean the appliance!
◎ Don’t clean the appliance when it still hot! The inside and external surface of the oven should preferably be
cleaned by damp cloth when it is cooled down.
◎ Wash all accessories in hot sudsy water or in a dishwasher, wipe dry with a paper or cloth towel.
◎ If you use your oven for an extended period of time, condensation may form. Dry it using a soft cloth.
◎ There is a rubber seal surrounding the oven opening, which guarantees its perfect functioning. Check the
condition of this seal on a regular basis. If necessary, clean it and avoid using abrasive products or objects to
do so. Should it become damaged, please contact your nearest After-sales Service Centre. We recommend
you avoid using the oven until it has been repaired.
◎ Never line the oven bottom with aluminium foil, as the consequent accumulation of heat could compromise
the cooking and even damage the enamel.
◎ Clear the glass door using damp cloth and dry it with a soft cloth..
Do not use harsh abrasive cleaners or sharp metal scrapers to clean the oven door glass since they can scratch the
surface, which may result in shattering of the glass.
Replacing the Lamp in the Oven
◎ Cut off the supply of power to the oven by turning off the omni-polar switch connecting it to the mains, or
by removing the plug if it is accessible
◎ Unscrew the glass cover attached to the lamp holder;
◎ Unscrew the lamp and replace it with another high-temperature lamp (572°F) with the
following characteristics:
- Voltage: AC220V-240V
- Wattage: 15W
- Socket: E 14