Full Product Manual
TASTO +e
-
the +and –buttons increase or decrease the time at a speed depending on how long button is pressed
Setting the time
press any two buttons (cooking time ,end time ,minutes counter) at the same time ,and +or –button to set the
desired time .this deletes any previously set program.
The contacts are switched off and the AUTO symbol flashes.
Manual use
By pressing the manual button the relay contacts switch on, the AUTO symbol switches off and saucepan
symbol lights up.
Manual operation can only be enabled after the automatic program is over or it has been cancelled.
Automatic use
Press the cooking time or end time button to automatically form the manual to the automatic function.
Semi-automatic use with cooking time setting
Press the cooking time button and set the desired time with +or -, the AUTO and cooking time symbols light up
continuously. The relay switches on immediately. When the cooking end time corresponds to the time of day, the
relay and the cooking time symbol switch off. the sound signal rings and the AUTO symbol flashes.
Semi-automatic use with end time setting
Press the end time button. The time of day appears on the display. Set the cooking end time with +button. The
AUTO and cooking time symbols light up continuously. The relay contacts switch on. When the cooking end
time corresponds to the time of day , the relay and the cooking time symbol switch off. When the cooking time is
up. The AUTO symbol flashes, the sound singal rings and both the relay and the cooking time button switch off.
Automatic use with cooking time and end time setting
Press the cooking time button and select the length of the cooking time with +or –button. The AUTO and
cooking time symbols light up continuously. The relay switches on. By pressing the cooking end time button the
next cooking end time appears on the display. Set the cooking end time with +button. The relay and the cooking
time symbol switch off .the symbol lights up again when the time of day corresponds to the cooking start time.
When the cooking time is up, the AUTO symbol flashes, the sound signal rings, the cooking time symbol and the
relay switch off
Minutes counter
Press the minutes counter button and set the cooking time with +or –button.
The bell symbol lights up when the minutes counter is operating, when the set time is up, the sound rings and the
bell symbol switches off.
Sound signal
The sound signal starts at the end of a programmer or of the minutes counter function and it lasts for 15minutes.
To stop it, push any one of the functions buttons.
Start programme and check
The programmer starts 4seconds after it has been set. The programmer can be checked at any time by pressing
the corresponding button.










