User Manual

OPERATION

5.) Freezing chamber temperature setting

Press the freezing temperature adjustment button to select the freezing temperature zone, and then press the

freezing temperature adjustment button to adjust the freezing chamber temperature. Each time the freezing chamber

button is pressed, the temperature shall drop 1°C / 1°F; after the temperature reaches -22°C / -7°F, press the

freezing button again, the freezing chamber temperature setting will be -14°C / 7°F. The freezing chamber setting

range is -22 ~ -14°C / -7 ~ 7°F.

6.) Distributor state setting

Soft touch the button of corresponding mode to select whole ice mode/water outlet mode/crushed ice mode, and the

corresponding mode indicator light will turn on; the setting will take effect immediately with no locking required.

7.) Distributor light control

When the distributor switch is pressed, the distributor light will turn on; and when the distributor switch is

disconnected, the distributor light is delayed by 3 seconds to before it turns off.

8.) Switch between Celsius and Fahrenheit

Long press ENERGY SAVING mode button for 3 seconds to switch between Celsius and Fahrenheit.

9.) Filter time reset

The working time of the power-on filter accumulates. When the filter works for 150 days, the filter icon will

light up, indicating the filter needs replacement. After 180 days, the filter icon will flash, indicating the

filter needs replacement. Long press the "filter time reset" button for 3 seconds to perform the function of

"FILTER RESET", resetting the filter timer.

NOTE: The accumulative filter working time is every 24 hours, and is stored in the electrically erasable

programmable read-only memory (EEPROM); it also features a power-off memory function.

10.) Ice machine mode

Short press the switch button of the Ice machine to set / cancel the function of Ice machine. When the function

setting of ice machine is effective, the indicator light of ice machine lights up, otherwise, it will turn off.

11.) Power-off storage

When the power is cut off, the instantaneous working state is locked, which can be maintained to power-on.

12.) Operation of door opening prompt and alarm control

When the refrigerator door is open, a prompt tone will be heard. If the door is not closed after 2 minutes, a buzzer

will sound off once every second until the door is closed.

13.) Error indicator

When the following prompts appear on the display screen, it indicates that the refrigerator is out of order.

Although the refrigerating/freezing function of the refrigerator can still work in under the following errors, the

user should contact qualified maintenance personnel to ensure normal/safe refrigerator operation.