Owners Manual

CLEANING THE COOKTOP

Periodically clean the burner heads, the cast iron grates, and the burner caps using warm

water. Remove burned food and fat residue with a rubber spatula. If food residue

prevents the smooth operation of the knob controls, please contact Cosmo Customer

Service to schedule service by a factory-trained professional (See Page 29).

CLEANING THE STAINLESS STEEL

For best results, use a stainless steel cleaning product with a soft sponge or

wipe. Alternatively, use a soft sponge or cloth with a warm soap and water solution.

Never use abrasive powders or liquids.

SERVICE & MAINTENANCE

Service and maintenance must carried out by authorized professionals only. To replace

parts such as burners, valves, and electric components, the cooktop must be removed from

the countertop by releasing the attachment hooks, loosening the attachment screws of

each burner, unscrewing the cooktop attachment nuts which are visible at the bottom of

the surface, removing the cooktop stainless steel top, and finally replacing the defective

parts.

NOTE: If the valves must be replaced, first disassemble the ignition switches wires. It is

recommended to replace the valve gaskets each time the valve is replaced, ensuring a

perfect seal between the body and the gas manifold.

WARNING!: Disconnect power before servicing unit.

WARNING!: After the initial installation of the appliance or after any service concerning

main gas parts of the appliance, perform a leak test using water with soap on the gas

connections in order to verify proper installation (See Page 14). Do not use fire/open

flames to test for gas leaks.

CARE & MAINTENANCE

CLEANING THE BURNER CAPS

Lift the burner caps from the burner

heads and wash them with soap and

warm water. Dry thoroughly before use.

Before reinstalling them on the burner

head, check that the gas flow holes are not

clogged with food or cleaning product

residue.

See diagram to properly install the burner

caps.