Owners Manual

19
INSTALLATION INSTRUCTIONS
REGULATE BURNER FLAME INTENSITY
To regulate the minimum flame on the burners, carry out the following procedure
indicated below:
1.) Turn on the burner and put the knob onto position MINIMUM (small flame).
2.) Remove the knob of the tap which is set for standard pressure. The knob is
found on the shaft of the valve itself.
3.) Besides the valve shaft, use a small screwdriver that fits the gold-colored screw
found on the lower part of the tap and turn the adjustment clock-wise or counter
clock-wise until the minimum flame reaches the desired intensity level.
4.) Make sure that that the flame does not go out when changing the position quickly
from MAXIMUM to the MINIMUM position. If it does, the minimum flame intensity
needs to be increased.