User Manual

18 19
CONVERT COOKTOP TO LP GAS
WARNING
This conversion kit shall be installed by a qualified service
agency in accordance with the manufacturer's instructions and
all applicable codes and requirements of the authority having
jurisdiction. If the information in these instructions is not
followed exactly, a fire, explosion or production of carbon
monoxide may result causing property damage, personal injury
or loss of life. The qualified service agency is responsible for
the proper installation of this kit. The installation is not proper
and complete until the operation of the converted appliance is
checked as specified in the manufacturer's instructions
supplied with the kit.
Tools Needed for Conversion:
• Wrench
• 7 mm Nut Driver
• Safety Glasses
• Small Flat-head Screwdriver
STEP 1 - ADJUST THE REGULATOR
IMPORTANT: Disconnect all electrical power at the main circuit breaker or fuse
box. Shut off the gas supply to the range by closing the manual shut-off valve.
1. Unscrew the regulator cap with the wrench.
2. Remove the retainer pin that is currently positioned for use with Natural Gas.
3. Turn the retainer pin upside down and replace it into the regulator cap. It is
now positioned for use with LP gas.
4. Screw and tighten the regulator cap back into the regulator with the wrench.
Regulator Cap
Regulator
Retainer Pin
Regulator Cap
If you wish to use this product with Liquefied Petroleum (LP) gas, you must
purchase the conversion kit Model #850SLTX-E-LPK or #640STX-E-LPK.
When the cooktop is converted for liquid petroleum (LP) gas, the LP gas supply
is required to provided a minimum of 10" to a maximum of 14" water column to
the cooktop regulator.
To order, please visit www.cosmoappliances.com or call 1-888-784-3108.