Installation Manual

STEP 1 - Unscrew Front Bracket
Locate the bracket at the front of the broiler.
Remove the screw.
STEP 2 - Remove the Burner
Carefully slide the burner forward and out of
the socket, without severing or damaging
the wire attached. Carefully lay the burner
down as shown in the image to the right.
STEP 3 - Change the Burner Orifice
With the burner out of the way look for the
orifice as shown. Continue with changing the
orifice, similarly to step 2 on page 4.
BROILER LP/PROPANE GAS CONVERSION
38