Manualshelf

Installation Guide

ManualsBrandsCosmo ManualsAppliances36 in. Ducted Island Range Mount Hood with LED Light and Permanent Filters in Stainless Steel
891011121314151617
will flash, push key A to switch to set hours and minutes, and then push C
or E to set the correct time. The Clock’s system is 24 hours.
When the motor is on, push the key B, the light is on, at the same time it
shows " " is flashing
as
w
ell on the digital display，and to push
key B to switch hours and minutes. To set the time to
automatically shut off the motor, push key C or E. Push key B for 3 seconds
to stop the delay timer.
Push key C or E, when the first speed is on, and it shows ― ‖ on
the digital
display，and push key C once again to turn it off；To run the 2
nd
,
3
rd
and ―Turbo‖ speed, then push Key E. If it’s ―Turbo‖speed is on, then
push E once again to turn it off; and push key C down to 3
rd
, 2
nd
and 1
st
speed.
Pus
h the key F, the light is flashing, and it shows― ‖ flashing on
the digital display，to push key F to switch hours and minutes，and to set
the alarm time by pushing the key C or E. To stop the alarm, push the
key F. And to cancel the alarm set, then push the key F for 3 seconds.
‖ on the digital display, Push the key G to on the light, and it shows ―
and push the G again to turn off the light.
•COMMANDS: (Fig.23)
A= Timer (automatic shut off)
B= Speed 1 / adjust / switch off
C= digital display screen (showing timer and speed)
D= Speed 3 / adjust / switch off
E= Light
When pushing A, digital display screen shows "15 minutes" for the timer,
and the minutes can be adjusted by pushing "+" or "-" on B and D. When the
first speed is activated, pushing A once will switch it off, and the digital
display will show "00". When pushing B, the display shows "F1" on the ,
and the first speed is on. Pushing B once to switch it off, and the digital
display will show "00".
When pushing D, it shows "F3" on the digital display screen, and the third
speed is on. Pushing D twice to switch it off, and it shows "00" on the
screen. The second speed F2 and Turbo speed F4 can be adjusted by pushing
B or D.
When pushing E, the buttons light is on and the light is on, only push E once
again to switch off the light.