Installation Guide

Upper Rear Hook
Support Track
Slot
Lower Rear Hook
31
INSIDE WALLS
• To help remove odors, use a clean sponge
or soft cloth to wipe the inside of the
refrigerator with a mixture of baking soda
and warm water. Mix 2 tablespoons of
baking soda to 1 quart of water (26 g soda
to 1 liter water.) Be sure the baking soda is
completely dissolved so it does not scratch
the surfaces of the refrigerator.
DOOR TRAYS
• Remove all items from tray, grab outer
ends and squeeze together, then lift and
pull out the tray.
• Hand wash tray and install back in place or
adjust height as desired.
SHELVES
• To remove shelf, grab the front side, tilt up
until the lower rear hook is removed from
the support track, then lift and pull shelf
out.
• Hand wash using a clean sponge or soft
cloth and a mild detergent in warm water.
Do not use glass cleaners, abrasive
cleansers, or flammable fluids. These can
scratch or damage the material.
• To replace shelf, insert the upper rear hook
in a slot of the support track while tilting
the front side of the shelf up, then lower
the front side and insert the lower rear
hook to lock the shelf in place.