Use and Care Manual

29
DISPLAY
• When the refrigerator first starts up the display screen will light up for 3
seconds before entering normal operation mode, and you will hear a
beep.
• The set temperatures of both the refrigerator and freezer are shown in
the display under normal operation.
Default refrigerator temperature: 39°F (4°C)
Default freezer temperature: 0°F (-18°C)
• Under normal circumstances, the display light will go out after 30 seconds
in lock state. Button operation on display panel will wake up display
screen. If opening the door wakes up screen, the display light will go out
immediately after door closes. When "Error Code" occurs, the display
screen lights up and will go out after 30 seconds.
Temperature Mode
The temperature scale is set to Fahrenheit (°F) by default.
• Press and hold the FRIDGE and FREEZER buttons together for 3 seconds to
change the temperature mode between °F and °C.
Error Codes
When the following codes appear on the display screen, it indicates a
problem with the refrigerator. Your refrigerator may seem to continue to
operate normally even if there is a fault present, but you should contact a
technician immediately regarding the error.
Error Code Description
E1 Refrigerator temperature sensor failure
E2 Freezer temperature sensor failure
E5 Freezer defrost sensor error
E6 System communication error
E7 Ambient temperature sensor error
EH Humidity sensor error
Eo Ice maker error