Use and Care Manual

PIZZA

The Pizza mode uses heat from the upper and lower heating elements and

adopts customized heating algorithm to optimize baking performance for

pizza, which is also ideal for pastries and cakes with wet covering and little

sugar and damp desserts in moulds, or dishes requiring more heat in the

lower area. Always preheat the oven first and place food near the middle

racks.

Setting the Pizza Mode

1. Press PIZZA. The default set temperature 400°F is shown in the display.

2. (Optional) Enter desired temperature with the number pads.

3. Press START/ENTER. The oven turns on and starts preheating. As the oven

preheats, the oven temperature is displayed. Once the oven reaches the

set temperature, a tone sounds.

4. Place the food in the oven after preheating.

5. Press CLEAR/OFF when cooking is finished, and remove the food from the

oven.

AIR FRY

The Air Fry mode uses heat from the upper and lower heating elements and

air movement from the fans to circulate hot air inside the oven. This mode is

specially designed for oil-free frying, and to produce foods with a crispier

exterior than traditional oven cooking. The Air Fry mode is intended for single

rack cooking only. Always preheat the oven first and place food centrally near

the middle racks. Use pans with low sides or no sides for better air flow over

foods.

Setting the Air Fry Mode (Example: Set Air Fry at 375°F.)

1. Press AIR FRY. The default air fry temperature 400°F is shown in the