Installation Guide

6
INSTALLATION REQUIREMENTS
TOOLS AND PARTS
Gather the required tools and parts before starting installation. Read and
follow the instructions provided with any tools listed here.
Tools Needed
• Tape measure
• Phillips screwdriver
• Level
• Drill
• 1/8" (3.2 mm) drill bit (for wood
floors)
• Masonry drill bit (for
concrete/ceramic floors only)
• Adjustable wrench or pliers
• Marker or pencil
• Safety glasses
• Gloves
Parts Needed
4-Wire cord or 3-Wire cord
(UL approved 40 or 50 AMP)
Strain Relief
Parts Supplied
Rear trim with screws Oven racks Anti-tip bracket with screws