Installation Guide

36
CHECKING OPERATION OF THE OVEN
NOTE:
• Ensure door is closed, all packaging is removed, and oven is empty
except for oven rack(s).
To Check Bake Heating Element:
1. Keep the oven door closed. The oven heating elements will turn off when
oven door is open.
2. Press BAKE on the oven control - the control will default to 350°F.
3. Adjust bake temperature setting to 170°F. (Press 1, 7, and 0.)
4. Press START/ENTER.
5. Listen for relays on the electronic control to "click".
• After a couple minutes, open the oven door temporarily. Without
touching the oven bottom, confirm that heat can be felt radiating
from the oven bottom and close the oven door.
6. Allow Bake mode to continue until oven has preheated to 170°F. Confirm
that display shows temperature increasing and that preheat signals when
temperature is reached.
7. Press CLEAR/OFF to stop the Bake mode.