Installation Guide

29
2. Plug power cord into a grounded outlet.
3. Use tape measure to measure from the floor to the top of the countertop
at all four corners of the installation space.
4. While range is still positioned outside the installation space, use a plier or
wrench to adjust the leveling leg at each corner so that the distance from
the floor to the underside of the cooktop edge matches the dimensions
measured in the installation space.
IMPORTANT: The metal flange under each side of the cooktop MUST be
placed over the cabinet countertop for proper unit support. The cooktop
should NOT rest directly on the countertop or else it could cause damage
to the cooktop voiding the warranty.
5. Using 2 or more people, gently move range into its final installation
location and insert the rear range foot into the slot of the anti-tip bracket,
being careful not to damage countertops, floor, or appliance.