Installation Guide

1. Loosen the 2 lower left and lower right terminal screws from the terminal

block.

2. Remove the lower center terminal screw and the ground screw. Remove

or cut part of metal ground strap.

3. Attach the bare ground (green) wire end to the range frame and secure it

in place with the ground screw.

4. Insert the bare neutral (white) wire end through the lower center terminal

block opening.

5. Insert the two side bare wire ends into the lower left and the lower right

terminal block openings.

6. Tighten the 3 terminal screws securely into the terminal block, and

replace the terminal block access cover.

COMPLETE INSTALLATION

PLACEMENT AND LEVELING RANGE

WARNING

ELECTRICAL SHOCK HAZARD

• Plug into a grounded outlet.

• Do not use an adapter or an extension cord.

• Failure to do so can result in death, fire, or electrical shock.