Installation Guide

24
4-WIRE CONNECTION: POWER CORD
Use this method for:
• New branch-circuit installations (1996 NEC)
• Mobile homes
• Recreational vehicles
• Areas where local codes prohibit grounding through the neutral
• The neutral wire of the supply circuit must be connected to the neutral
terminal located in the lower center of the terminal block. The power
leads must be connected to the lower left and the lower right terminals
of the terminal block. The grounding lead must be connected to the
frame of the range with the ground screw. Failure to do so can result in
electrical shock, severe personal injury or death.
1. Remove and retain the lower 3 terminal screws from the terminal block.
2. Remove the ground screw. Remove or cut part of metal ground strap.
3. Insert the ground screw into the power cord ground (green) wire terminal
ring, and secure it to the frame of the range.
WARNING
BLACK
RED
WHITE
GREEN
Remove or cut
ground strap