Delivery Information

3
Preparing to install your dishwasher
Parts supplied:
Tools needed:
Materials needed:
Wood screws (4)
Hose clamp
Top mounting clips (2)
Drain hose
Phillips screwdriver
Adjustable wrench
Level
Flashlight
1/4 in. and 5/16 in.
Nut driver
Carpenters
square
Tubing cutter
Bucket
Safety glasses
Measuring tape
Hole saw set
Drill and bits
Gloves
New installations only
90° Elbow, ferrule and compression
nut. (3/8 NPT external thread on one
end. Other end sized to fit water
supply line
Wire nuts (UL listed)
Teflon thread
seal tape
Air gap (if
required)
Hand shut-off
valve
Screw-type hose clamps
Strain relief (for
electrical connections)
Electrical cable or power
cord (See Electrical
Requirements section)
Hot water line (min.
3/8 in. copper) kit
Waste tee for
house plumbing
(if applicable)
Coupler for extending
drain line (if applicable)
New installations only