Installation Guide
6
INSTALLATION: LEGS
The ranges must only be used with the legs properly installed.
Before installing the legs, position the appliance near its final location as the
legs are not suitable for moving the appliance over long distances.
Four  height-adjustable  legs  are  shipped  with  the  range  in  the  polystyrene
container situated over the appliance.
After unpacking the range, raise it enough
to insert the legs in the appropriate receptacles situated on the lower part of
the  appliance.  Lower  the  range  gently  to  keep  any  undue  strain  from  legs
and mounting hardware. If possible use a pallet or lift jack instead of tilting
the unit.
Adjust leg height to the desired level by twisting the inside portion of the leg
assembly  until  the  proper  height  is  reached.  Check  with  a level device
to ensure  the cooktop is perfectly level.










