Installation Guide
25
OPERATING INSTRUCTIONS
COOKTOP SURFACE COOKING
IMPORTANT: Remember to set all cooktop / oven / broiler burners control knob
to OFF position when not in use.
SURFACE BURNER OPERATION
Electric Ignition
To activate  the  electric  ignition, simply  turn  the control knob  counter-clockwise  to maximum 
power (*position). Press the knob to start the flow of gas and the ignition spark. The spark will 
released at the metal tip of the white ceramic pin located on the side of the burner. Once the 
flame is on, release the control knob gently.
If the flame turns off, repeat the above procedure.
ATTENTION: Do not ignite burners if the black burner cap is not installed or not
centered. The flame will be irregular.
Manual Ignition
Manual ignition  is  always  possible  even  when  the  power  is  cut  off or  in the  event  of  power 
failure.  Turn  the  control  knob  counter-clockwise  to  the  MAXIMUM  position.  Light  the  flame 
with a kitchen lighter or with a match.
• Burner Position
Example showing Front right burner
• Maximum Temperature Setting
Recommended control knob
position for burner ignition
• Minimum Temperature Setting
(*) Appliance with worktop gas
valves alternative type










