Use and Care Manual
11
TIME OF DAY
When the power is connected, the screen displays 12:00 and the bar above 
To  set  the  correct  time,  press  the  "-"  or  "+"  button
  until  the  correct  time  is 
displayed. After 5  seconds,  the clock  will start automatically, or  you can press 
the function button to select manual operation. 
a b c
a Decrease Time
b Function
c Increase Time
SET THE TIMER
The digital countdown timer can be set up to 12 hours and 59 minutes maximum. 
To set the timer, press the function button repeatedly until the bar above 
is displayed. Once the function button is released, the current time is displayed and 
the bar above        flashes. When the function button is pressed the remaining time is 
displayed. When the set time is reached,          disappears and the alarm will ring. To 
stop the alarm, press any button. 
NOTE: After pressing the function button, you must set the timer within 5 seconds. 










