Installation Guide

Backsplash with screws Anti-tip bracket with screws

(COS-965AGC only)

Anti-tip wall anchor hooks with

screws (COS-965AGFC only)

Gas pressure regulator Gas pipe adapter with washers

Power cord with strain relief

(Pre-installed for COS-965AGC)

INSTALLATION REQUIREMENTS

TOOLS AND PARTS

Gather the required tools and parts before starting installation. Read and

follow the instructions provided with any tools listed here.

Tools Needed

• Tape measure

• Flat-blade screwdriver

• Phillips screwdriver

• Level

• Drill

• Wrench or pliers

• Pipe wrench

• 15/16" (2.4 cm) combination

wrench

• 1/8" (3.2 mm) drill bit (for wood

floors)

• Pipe-joint compound resistant to

Propane gas

• Marker or pencil

• 3/16" (4.8 mm) carbide-tipped

masonry drill bit (for

concrete/ceramic floors)

• Noncorrosive leak-detection

solution

For Propane/Natural Gas

Conversions

• 1/2" (1.3 cm) combination wrench

• 1/4" (6 mm) nut drive

• 9/32" (7 mm) nut drive

• Masking tape

Parts Supplied