Owner Manual

Start at 90°Angle and line up the hooks
on filter with the rectangular slots on the
range hood. Lift the filter up and push the
button on filters to allow it to lock into
place.
Insert and install filters according to the
diagram on Next Page.
Extend the 6" Duct to the vent pipe of your
building or outside. For optimal performance
try to minimize bending of the duct.
Mount outer chimney bracket (E) to the wall
appropriate to the height of the outer
chimney. Use the hooks on bracket to
mount bottom chimney.
Extend Inner Chimney until it touches the
ceiling. Align sides with Inner Chimney
Mounting Bracket (H)(already mounted to
wall) and firmly screw sides of Inner
Chimney to bracket with 3/8" screws (C
in parts list).
WALL
11
* If you intend to run your ducting through the back
wall behind the hood, it is not necessary for the
chimney to touch the ceiling.