Use and Care Manual

INSTALLATION REQUIREMENTS

1. Please read the following instructions carefully.

This Range Hood can be vented through the top or back. Remove the

Panel according to the option chosen (Fig. 1). Panel can be removed by

removing the screws. For ductless installation, remove panel from the

back and make sure that there is a panel on the top.

For optimal performance the Range Hood must be installed 24" - 36" in

height from the cooktop. (Fig. 2)

WARNING

Sufﬁcient air is needed for proper combustion and exhausting of gases through the chimney of fuel burning equipment

to prevent back- drafting. Follow the cooking equipment manufacturers guideline and safety standards such as those

published by the National Fire Protection Association (NFPA), the American Society for Heating, Refrigeration and Air

Conditioning Engineers (ASHRAE), and local code. When cutting or drilling into wall or ceiling, do not damage

electrical wiring and other hidden utilities. Ducted systems must always be vented outdoors.

Electrical Requirements: Rated Voltage and Frequency:) 110-120V~

60Hz. Motor Input Power: 79W