Use and Care Manual

MAINTENANCE

CAUTION: NEVER PUT YOUR HAND INSIDE OF THE UNIT WHILE ITS OPERATING. FOR

THE BEST PERFORMANCE CLEAN YOUR

RANGE HOOD REGULARLY.

CLEANING

Use only mild soap or cleaning solutions to clean the hoods'

outer surface. Dry surfaces using a soft cloth.

2. Stainless Steel cleaner may be used on the external surface.

3. Clean the Range Hood assembly 1 to 3 months depending on use.

4. DO NOT clean the motor or electrical components with water or

any other liquid.

REPLACING LIGHT BULBS

CAUTION: LAMP UNIT MAY BE HOT! WAIT UNTIL THE UNIT IS COOL. BEFORE

ATTEMPTING TO REPLACE THE LED LAMPS MAKE SURE THE UNIT IS POWERED OFF AND

UNPLUGGED.

Remove the aluminum filters

Disconnect the wire for the LED light being replaced.

3. Reach your hand into the unit and push the LED light housing out of the

hole to remove it. Replace the LED light and connect the wire.

4. Reinstall the aluminum filters.