Use and Care Manual

RECIRCULATING CHARCOAL FILTERS
Installing Recirculating Filters (For Ductless Model Only)
13
Skip this page if you are installing a Ducted Range Hood.
Charcoal Filters are only included with Ductless Models
Additional Aluminum or Charcoal Filters can be purchased from
www.cosmoappliances.com
Fig. 1
1. Remove the Aluminum Filters from the Range Hood
2. Locate Fig. 1 , unscrew the 6 screws along the Motor Ring (metal circle).
Set motor ring to the side.
3. Take your charcoal filter and align the holes on the motor housing to the holes of the filter.
4. Align the motor ring with the screw holes of the filter.
5. Lock into place by screwing the motor ring back into place.
The carbon filter must be replaced every 4-6 months depending on use.