INSPIRING THE WORLD’S KITCHEN OVER THE RANGE MICROWAVE COS-3019ORM2SS INSTALLATION GUIDE IMPORTANT SAFETY INSTRUCTIONS Carefully read the following Important information regarding installation safety and maintenance. Keep these instruction for future reference.
Installation Instructions THANK YOU FOR YOUR PURCHASE Thank you for your purchase. We know that you have many brands and CONTENTS Adapting Microwave Blower for Outside Back Exhaust................17– 18 products to choose from and we are honored to know that you have decided General information Mount the Microwave Oven ................19 to take one of our products into your home and hope that you enjoy it. Important Safety Instructions .................................. 3 Electrical Requirements ..
IMPORTANT SAFETY INSTRUCTIONS This product requires a three-prong grounded outlet. The installer must perform a ground continuity check on the power outlet box before beginning the installation to ensure that the outlet box is properly grounded. If not properly grounded, or if the outlet box does not meet electrical requirements noted (under ELECTRICAL REQUIREMENTS), a qualified electrician should be employed to correct any deficiencies.
Installation Instructions Installation Instructions 1 PLACEMENT OF THE MOUNTING PLATE TOOLS YOU WILL NEED Pencil # 1 Phillips screwdriver Tin snips (for cutting damper, if required) Ruler or tape measure and straight edge Scissors (to cut template, if necessary) Electric drill with 3⁄16“, 1⁄2“ and 5⁄8“ drill bits A.
Wall Plate Location Installation Instructions C. DETERMINING WALL PLATE LOCATION UNDER YOUR CABINET Plate position-beneath flat bottom cabinet NOTE: IT IS VERY READ IMPORTANT AND FOLLOW IN THE TO THE DIRECTIONS INSTALLATION BEFORE PROCEEDINGINSTRUCTIONS REAR WALL TEMPLATE.WITH THIS This Rear mounting Wall Template serves plate and outlet. to position to locate the horizontal the bottom 1. Use a level exhaust accurately. to check that the template 2.
Installation Instructions Installation Instructions INSTALLATION INSTRUCTIONS FOR EXTERNAL EXHAUST DUCTING 2 INSTALLATION TYPES This microwave oven is designed for adaptation to the following three types of ventilation: A. Outside Top Exhaust (Vertical Duct) B. Outside Back Exhaust (Horizontal Duct) C.Recirculating (Non-Vented Ductless) A OUTSIDE TOP EXHAUST (VERTICAL DUCT) (Choose A, B or C) NOTE: This microwave is shipped assembled for Recirculating.
Installation Instructions EXTERNAL EXHAUST DUCTING A OUTSIDE TOP EXHAUST INSTALLATION OVERVIEW OUTSIDE TOP EXHAUST (EXAMPLE ONLY) The following chart describes an example of one possible ductwork installation. EQUIVALENT LENGTH x NUMBER USED = EQUIVALENT LENGTH Roof Cap 24 Ft. (7.3 m) x (1) = 24 Ft. (7.3 m) 12 Ft. (3.6 m) Straight Duct (6”/15.2 cm Round) 12 Ft. (3.6 m) x (1) = 12 Ft. (3.6 m) Rectangular-to-Round Transition Adaptor* 5 Ft. (1.
A2. USE TOP CABINET TEMPLATE FOR PREPARATION OF TOP CABINET 2 Carefully pull out the blower unit. The wires will extend far enough to allow you to adjust the blower unit. A3. End B You need to drill holes for the top support screws, a hole large enough for the power cord to fit through, and a cutout large enough for the exhaust adaptor. ADAPTING MICROWAVE BLOWER FOR OUTSIDE TOP EXHAUST 5 Secure blower unit to microwave with the screw removed in Step 1. Make sure the screw is tight.
A5. MOUNT THE MICROWAVE (cont.) B OUTSIDE BACK EXHAUST A6. ADJUST THE EXHAUST ADAPTOR Open the top cabinet and adjust the exhaust adapter to connect to the house duct. Cabinet Front Cabinet Bottom Shelf Filler Block Blower Plate Back of Microwave Damper Equivalent to Depth of Cabinet Recess INSTALLATION OVERVIEW B1. Prepare Rear Wall B2. Remove Blower Plate B3. Attach Mounting Plate to Wall B4. Prepare Top Cabinet B5. Adjust Blower B6.
B. Outside Back Exhaust (Horizontal Duct) B. Outside Back Exhaust (Horizontal Duct) B3. ATTACH THE MOUNTING PLATE TO THE WALL B5. ADAPTING MICROWAVE BLOWER FOR OUTSIDE BACK EXHAUST (cont.) 8 Place the blower unit back into the opening. AFTER: Fan Blade Openings Facing Back End A 4 Rotate blower unit counterclockwise 180°. Before Rotation After Rotation End B • Read the instructions on the TOP CABINET TEMPLATE. Attach the plate to the wall using toggle bolts.
B. Outside Back Exhaust (Horizontal Duct) B6. Cabinet Front MOUNT THE MICROWAVE OVEN C RECIRCULATING (non vented ductless) Cabinet Bottom Shelf Filler Block Equivalent to Depth of Cabinet Recess C1. Attach Mounting Plate to Wall C2. Prepare Top Cabinet C3. Check Blower Plate C4. Mount the Microwave Oven C5. Install or change Charcoal Filter Self-Aligning Screw Microwave Oven Top 4 NOTE: If your cabinet is metal, use the nylon grommet around the power cord hole to prevent cutting of the cord.
C. Recirculating (Non Vented Ductless) C. Recirculating (Non Vented Ductless) C4. MOUNT THE MICROWAVE OVEN C2. C4. MOUNT THE MICROWAVE OVEN USE TOP CABINET TEMPLATE FOR PREPARATION OF TOP CABINET You need to drill holes for the top support screws and a hole large enough for the power cord to fit through. •Read the instructions on the TOP CABINET TEMPLATE. •Tape it underneath the top cabinet.
5 BEFORE YOU USE YOUR MICROWAVE Press the bottom of charcoal filter to place it into the correct position. Make sure the microwave oven has been installed according to instructions. 1. Replace house fuse or turn breaker back on. 5. ION LLAT INSTA UCTIONS R INST 6. 2. Read the USE & CARE Manual. Remove all packing material from the microwave oven. RE &|+&= CA USE NUAL MA Reinstall the vent by sliding the bottom of the vent into place. Push the vent top into position and slide right into place.
Operational check 1. Make sure the unit has been installed according to these instructions. 2. Remove all packing materials from the oven. 3. Replace house fuse or turn circuit breaker back on. 4. Plug power cord into receptacle . 5. Read operating instructions before testing the product. 6. Turn on the exhaust fan at Turbo speed and confirm it is operating by using a tissue (it will stick to the filter). 7. Confirm the outdoor exhaust flapper has opened. 8.
IMPORTANT Do Not Return This Product To The Store If you have a problem with this product, please contact Cosmo Customer Support at +1(888)784-3108 DATED PROOF OF PURCHASE, MODEL #, AND SERIAL # REQUIRED FOR WARRANTY SERVICE IMPORTANT WARRANTY AND SERVICE Ne pas Réexpédier ce Produit au Magasin Pour tout problème concernant ce produit, veuillez contacter le service des consommateurs Cosmo Customer Support au +1(888) 784-3108 UNE PREUVE D’ACHAT DATEE EST REQUISE POUR BENEFICIER DE LA GARANTIE.
Cosmo is constantly making efforts to improve the quality and performance of our products, so we may make changes to our appliances without updating this manual. Electronic version of this manual is available at: www.cosmoappliances.
