Installation Manual

18 19
10 If you have recessed cabine
ts:
• Make two filler blocks out of scrap wood pieces the size of shaded areas H.
They must be as thick as the
depth of the cabinet recess.
• Drill 5/8" holes in the filler blocks to align with points A and B.
• Align the blocks with the corresponding holes in the cabinet. They
should be at the same level as the
bottom edge of the cabinet frame.
11 Remove the template.
Filler blocks
Step 6: Option A - Adapt the microwav
e blower for
outside top exhaust
1 Remove and save the five screws that hold the blower unit in the
microwave.
2 Carefully pull out the
blower unit. The wir
es will extend far enough
to let you adjust the blower unit. Do not disconnect the wires.
Warning
Do not pull or stretch the blower unit wiring. Make sure that the wires
are not
pinched.
3 Turn the b
lower unit 90° so that the fan blade openings are facing out
the top of the microwave.