Installation Guide

44
NOTE:
Align notches in burner caps with pins in burner base.
Make sure the hole in the burner base is positioned over the igniter.
Burner caps should be level when properly positioned. If burner
caps are not properly positioned, surface burners will not light.
The burner cap should not rock or wobble when properly aligned.
3. Place burner grates over burners bases and caps.
4. For COS-GRP486G (48") only:
(Optional) Place the griddle over one of the burner grates.
Standard
burners
Double-ring
burners
Cap
Base
Orifice
holder
Correctly positioned
Incorrectly positioned
COS-GRP486G (48")
A. Auxiliary (Small)
B. Double Ring (X-Large)
C. Auxiliary (Small)
D. Double Ring (X-Large)
E. Semi Rapid (Medium)
F. Rapid (Large)
G.Semi Rapid (Medium)
H. Rapid (Large)
A B C D
E F G H