Installation Guide

GAS SUPPLY REQUIREMENTS

IMPORTANT:

• Observe all governing codes and ordinances.

• This installation must conform with all local codes and ordinances. In the

absence of local codes, installation must conform with American National

Standard, National Fuel Gas Code ANSI Z223.1/NFPA 54 - latest edition,

or in Canada, the Natural Gas and Propane Installation Code, CAN 1-1.1-

M81 - latest edition.

• Leak testing of the range must be conducted according to the

manufacturer's instructions. Do not use a flame to check for leaks.

WARNING

FIRE AND EXPLOSION HAZARD

• Use a new CSA International approved gas supply line.

• Install a shut-off valve.

• Securely tighten all gas connections.

• If connected to LP, have a qualified person make sure gas pressure does

not exceed the maximum pressure listed in this section.

• Examples of a qualified person include:

- licensed heating personnel

- authorized gas company personnel

- authorized service personnel

• Failure to do so can result in death, explosion or fire.