Use and Care Guide

Replacing the oven lamp

Electrical Shock Hazard

Failure to follow these instructions can result in death, fire, or electrical shock.

1. Disconnect the oven from the

power supply by means of the

omni-polar switch used to connect

the appliance to the electrical

mains, or unplug the appliance if

the plug is accessible.

2. Remove the glass cover of the lamp-

holder, turning counter-clockwise.

(See Figure 11)

3. Remove the lamp and replace with a

lamp resistant to high temperatures

572°F (300℃) with the following

characteristics:

· Voltage: 208-240V

· Wattage: 25W

· Type: E 14

4. Replace the glass cover and

reconnect the oven to the main

power supply.

Figure 11