Use and Care Guide

Electrical installation

Electrical Shock Hazard

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock

Only a qualified person in compliance with the instructions provided must install the

appliance. The manufacturer declines all responsibility for improper installation, which may harm

persons and animals and damage property.

IMPORTANT:

 The power supply to the appliance must be cut off before any adjustments or

maintenance work is done on it.

IMPORTANT:

Local Codes may vary; installation, electrical connections and grounding must comply with

all applicable local codes.

lf local codes permit grounding through the electrical supply neutral, connect both the white

neutral wire and the bare ground wire from the oven to the white neutral electrical supply

wire.

All model ovens on the front cover are dual rated, designed to be connected to either 208/

240V AC, 60Hz, 3 wire, two-phase power supply. (See Figure 3)

The electrical supply should be 3-wire two-phase AC. Install a suitable conduit box

(not included).

An appropriately-sized, U-listed conduit connector must be used to correctly attach the

conduit to the junction box.

CIRCUIT REQUIRED

208V,60Hz

240V,60Hz

12 AMP

15 AMP

Figure 3