Manual and User Guide

Page 7 of 19
Memory function
Child safety device
ON/OFF button
Oven function selection
Clock Functions
Selector buttons
Oven Functions
Clock functions/Operating time
Thermometer symbol
Temperature
Memory: P / Test: d
Speekcook
Child safety device
Operating the Oven
The Electronic Oven Control
General instructions
Always switch the appliance on first by pressing the On/Off button.
When the selected function is lit,the oven begins to heat up or the time set begins to count down.
When the selected temperature is reached,an audible signal sounds.
The oven light is switched on as long as an oven function is started.
The oven light is goes off after 10 minutes when the appliance switched off automatically.
Switch appliance off using the On/Off button.
Selecting the oven function
1. Switch on the oven with the On/Off button.
2. Press the or buttion repeatedly untial the desired oven function appears.
A suggested temperature appears on the temperature diplay.
If the suggested temperature is not changed within approx. 5 seconds,the oven begins to heat up.
Changing the oven temperature
Press the or buttion, to raise or lower the temperature.
The setting changes in steps of 5
.
Thermometer symbol
The slowly rising thermometer symbol indicates how hot the oven is as it heats up.
The three segments of the thermometer symbol show that Fast Warm Up is working.
Changing the oven function
To change the oven function, Press the or buttion repeatedly untial the desired oven function is displayed.
Switching off the oven
Switch off the appliance using the On/Off button.
Speedcook
After an oven function is selected, with the use of the additional function Speedcook the empty oven can be
pre-heated in a relatively shore time.
Important: Do not put the food to be cooked into the oven, until Speedcook is completed and the oven is operating