Manual and User Guide

Page 6 of 19
How to use your oven
This multi-function oven combines the advantages of traditional convection ovens with those of the more modern fan
assisted models in a single appliance.
It is an extremely versatile appliance that allows you to choose easily and safely between different cooking modes.
Notice: The first time you use your appliance, we recommend that set the thermostat to the highest setting and leave
the oven on for about half an hour with nothing in it, with the oven door shut. Then open the oven door and let the room
air in. The odor that is often detected during this initial use is due to the evaporation of substances used to protect the
oven during storage and until it is installed.
Notice: Place the dripping pan provided on the bottom shelf of the oven to prevent any sauce and/or grease from
dripping onto the bottom of the oven only when grilling food or when using the rotisserie (only available on certain
models). For all other types of cooking, never use the bottom shelf and never place anything on the bottom of the oven
when it is in operation because this could damage the enamel. Always place your cookware (dishes, aluminum foil, etc.
etc.) On the grid provided with the appliance inserted especially along the oven guides.
Before using for the first time
Setting and changing the current time
The oven only operates when the time has been set.
When the appliance is connected to the electrical supply or when there has been a power cut,the symbol for Time
flashes automatically.
1. To change a time that has already been set,press the Clock functions button repeatedly untial the symbol for
Time flashes.
2. Using the or button,set the current time.
After about 5 seconds,the flashing stops and the clock displays the time of day set.
The appliance is now ready for use.
Getting to know the appliance
The appliance can be operated in test mode for testing or performing all operating steps.The oven will not heat up
during the test.
Switching on the test mode
1. Switch off the appliance using the On/Off button.
2. Press and hold and buttions at the same time untial an acoustic signal is heard and “d” lights up in the
display.
Switching off the test mode
1. Switch off the appliance using the On/Off button.
2. Press and hold and buttions at the same time untial an acoustic signal is heard and “d” goes up in the display.