Use and Care Guide

CARE GUIDE

Cleaning the worktop: Periodically clean the burner heads, the cast

iron pan supports and the burner caps using warm water. Remove

burned food and fat residues with a rubber spatula . If food residue

prevent the smooth operation of the control knobs,

call the customer service hotline to schedule service by a

factory-trained professional.

Cleaning stainless steel: For best results use a stainless steel cleaner

product with a soft sponge or wipe. Alternatively use a soft sponge or

cloth with a warm soap and water solution. Never use abrasive

powders or liquids!

Cleaning the burner caps: Lift the burner caps from the burner

heads and wash them in a warm soap and water solution. Dry

thoroughly before using them again. Before reinstalling them on the

burner head, check that the gas flow holes are not clogged with food

residues or cleaning product residues.

ATTENTION: For further details about cleaning of the appliance,

please contact your appliance retailer.

SERVICE & MAINTENANCE INSTRUCTIONS

Service and maintenance only to be carried out by an authorized

person

To replace parts such as burners, valves and electric components,

the cooktop must be removed from the countertop by releasing the

attachment hooks, loosening the attachment screws of each burner,

unscrewing the cooktop attachment nuts which are visible at the

bottom of the surface, removing the cooktop stainless steel top, and

finally replacing the defective parts.