User's Manual

- 18 -
5-3. Error Code
Sensor Location: Please refer to “6-1. Sensor Location”.
Code Condition Cause of problem Remedial Measures
00- 01 Upper Unit Open Upper unit is opened.
Close the cover.
00- 02 Rear Cover Open Rear Cover is opened.
10- 02 CSR Sensor Error
1. Upper Cover is
opened.
2. Remaining note or
foreign matter.
3. Sensor is dirty.
1. Close the cover.
2. Remove jammed notes or
foreign matter.
3. Clean the sensor.
10- 03 CSL Sensor Error
10- 04 USR Sensor Error
1. Remaining note or
foreign matter.
2. Sensor is dirty.
1. Remove jammed notes or
foreign matter.
2. Clean the sensor.
10- 05 USL Sensor Error
10- 06 DSR Sensor Error
10- 07 DSL Sensor Error
10- 08 UPR Sensor Error
10- 09 UPL Sensor Error
10- 10 LPR Sensor Error
10- 11 LPL Sensor Error
10- 12 USS Sensor Error
10- 13 LSS Sensor Error
30- 01 CS Sensor JAM
30- 02 US Sensor JAM
30- 03 DS Sensor JAM
30- 04 UP Sensor JAM
30- 05 LP Sensor JAM
1. Feeding Failure
2. Sensor is dirty.
1. Remove notes from
Hopper and count again.
2. Hopper Sensor is dirty.
90- 01 Hopper Feeding Error Feeding Failure
Check the Jammed note or dirt
on the Hopper Sensor
90- 02 Counting Error
Counting Error Recount all notes.
90- 03
Sorting Error
90- 04
D0- 01 Feed Motor Error
Remaining note or
foreign matter.
Remove jammed notes or
foreign matter.
D0- 02 Main Motor Error