User's Manual

红色线表示折线 成品尺寸：119 x 77 mm
DESKTOP CHARGER W/
PORTABLE BLUETOOTH SPEAKER
Warning Tips
FAQs
1) Do not charge the speaker with other unsuitable power adaptors,
It may cause damage to the speaker. The speaker must be charged
properly by the given USB-C charging cable.
2) In order to avoid damage to your hearing and prolong the
speaker’s use-life, please do not listen to music for long time in high
volume environment.
3) When a fault occurs, please immediately turn off the power
switch and unplug the USB plug to prevent speaker and other
components from being damaged.
R-60
1
2
3
4
5
Type-C Input
Power Switch
Indicator light
Center of Wireless
Charger
Luminous Panel
6
Groove Phone Stand
Product Introduction
Package Contents
Product Features
R-60 x1
Type-C Charging
Cable x 1pcs
User Manual x1
1
3
4
2
5
6
5.0
3W
20Hz-20KHz
≤1.0%
≥75dB
≤10m
9V/2A,5V/2A
10W Max.
113x100x83mm
Model:
Wireless Version:
Loudspeaker Output:
Frequency Response:
Distortion:
Signal-To-Noise:
Range:
Wireless charging input:
Wireless charging output:
Dimension:
Specification
R-60
Thank you for our desktop charger with portable Bluetooth speaker.
Please read the manual carefully.
Operating Instruction
1.Pairing with mobile phone
2.Charging wireless speaker
3.Wireless charging device (Optional)
1. Connect the
power supply
2. Place the phone in the
wireless charging area
3. Start charging
● Slide power switch to the left to turn on wireless speaker. You will hear
“Bluetooth device is ready to pair.”
● Turn on the bluetooth function of the mobile phone. Search for the
accessible Bluetooth devices and select name “R-60” from the
device list to pair. The mobile phone will show “connected”. If the
phone is paired with the wireless speaker, you will hear “The bluetooth
device is connected successfully.”
● After the speaker is connected you can play your music and listen.
● Insert the USB-C charging cable to the speaker and the other end
to the power of the unit using the included USB-C cable.
● Red blinking light means it is low on power. Red LED will light up
when charging. The Red LED light will go off when fully-charged.
Note: When the speaker’s voice is lower than normal or you hear a
warning tone, please charge the speaker.
● Insert the USB-C charging cable to the speaker and insert the other end
to the power of the unit with included USB-C cable.
● Put the phone on the wireless charging area and make sure the phone
is properly positioned for charging (most likely the center).
Note: make sure your phone is fit for the Qi standard receiving
equipment.
**Please note that cases or attachments may interfere with wireless
charging.**
1) Why is there no sound when the speaker is turned on?
A: Make sure that you have charged the battery fully for the first
time.Charging time is approx 3 hours.
2) Why is there no sound when playing the speaker?
A: Check the speaker is connected by you phone. If there is no
connection, please reconnect and make sure you have the phone
connected to the proper speaker.
3) How to recognize the Bluetooth speaker is fully charged?
A: When the speaker is being charged, and the red indicator is
automatically turned off, it is already fully charged.
4) Why is the phone not charging?
A: Make sure the positioning of the phone is correct on the charger
and that the power source is connected.