User Manual

7 8
Changing Position of Shoulder Harness Strap
5. Pull Metal
Retainer
Completely
Through Pad and
Shell
6. Check Buckle
Pull up on buckle
to make sure it is
secured.
The buckle
MUST
not pull out.
WARNING: Failure to place
buckle’s metal retainer completely
through pad and shell can result in
serious injury or death.
1. Fully Loosen
Harness Strap
Push down on
harness release lever
(under flap on front of
seat pad) while pulling
out on harness strap
as shown.
2. From Back,
Remove Harness
Strap Loops From
Splitter Plate
3. Pull Harness
Strap Out of
Shoulder Harness
Slots
continued on next page
If you will be using
the lowest shoulder
harness slots, see
pages 10-14.
Otherwise, continue
on to step 4.