User Manual

3 4
4. Place Child in
Child Restraint to
Determine Proper
Harness Fit
The child’s bottom
and back should
be flat against the
child restraint. See pages 4-5 for fit
guidelines.
How Does Your Child Fit?Prepare Child Restraint to Fit Your Child
4
1. Fully Loosen
Harness Strap
Push down on harness
release lever (under
flap on front of seat
pad) while pulling out
on harness strap as
shown.
3. Release Chest Clip
Press on chest clip
release button and pull
apart. Place harness
strap out of the way.
2. Unbuckle Harness
Press in towards the
top of the red button.
Pull buckle tongues
out.
REAR FACING
Buckle Position
Start in the 1st slot and
adjust outward as your
child grows.
Buckle should be used
in the slot closest to
your child. The buckle should be not
underneath or behind your child.
1st or 2nd slot MUST be used.
Harness Strap
Position
Always choose the
shoulder harness slot
closest to your child’s
shoulder height.
Harness strap MUST be at or slight-
ly below shoulders. If the lowest
shoulder harness slots are above the
child’s shoulders, do not use this child
restraint.
To change the buckle position, see pages 6-7.
To change harness strap position, see pages 8-9.
To make adjustments for smaller infants, see pages 10-14.
Use the guidelines below to determine if the buckle and harness strap are in the right
place for your child.
1
2
continued on next page