User Manual

51 52
9. Check Belt
Tightness
Hold child restraint
at the belt path with
your weakest hand.
Push and pull from
side to side.
To Release Lower
Anchor Belt
Remove child from
child restraint.
Remove tension from
the lower anchor belt
by pushing down on
side of child restraint
with the lower anchor
belt adjuster. Then
press the adjuster
button to loosen belt.
Unhook from anchor by squeezing spring
lever on hook, pushing hook back into
the seat bight, and twisting. Then pull it
out of the vehicle seat.
Store lower anchor belt when not in
use. See page 29.
It should not move more than 1 in.
(2.5 cm). If it moves more than 1 in.
(2.5 cm), you can try:
A. Reinstalling the child restraint.
B. Putting your knee in the seat and
pulling the belt tighter.
C. Changing to a different seating
location.
D. Switching to vehicle belt installation.
Vehicle Belt Installation
WARNINGS: Do not use the
lower anchor belt
along with the
vehicle lap or lap/
shoulder belt.
Secure lower
anchor hooks to storage
attachments as shown when
installing with vehicle belts.
Check vehicle belt before each
use. Use only if the belt can be
tightened properly and locked
securely in place.
Failure to follow these warnings
can result in serious injury or
death.
continued on next page
1. Place
Child Restraint
Forward-Facing
Flush Against
Vehicle Seat Back
2. Loosely Attach
Tether Hook
Check vehicle
owner’s manual for
specific location.