User Manual

41 42
NOTE: You may
need to place a large
rolled towel(s) or
foam pool noodle(s)
under front of child
restraint to help
make level line
parallel with the
ground.
Check often to be sure padding is still in
place and the belt is tight.
Choosing Rear or Forward Facing
To Release Lower
Anchor Belt
Remove child from
child restraint.
Remove tension from
the lower anchor belt
by pushing down
on side of child
restraint with the
lower anchor belt
adjuster. Then press
the adjuster button
to loosen belt. Unhook from anchor by
squeezing spring lever on hook, pushing
hook back into the seat bight, and
twisting. Then pull it out of the vehicle
seat.
Store lower anchor belt when not in
use. See page 29.
Vehicle Belt Installation
WARNINGS: Do not use the lower anchor belt
along with the vehicle lap or lap/shoulder belt.
Secure lower anchor hooks to storage attachments as
shown when installing with vehicle belts.
Secure the tether hook when used rear facing. Attach
the tether hook to storage attachment as shown and
gently tighten to remove slack.
Check vehicle belt before each use. Use only if the belt
can be tightened properly and locked securely in place.
Failure to follow these warnings can result in serious injury or death.
continued on next page
11. Recheck Level
Line
Repeat steps 6-11
if level line is not
parallel with the
ground.