User Manual

21 22
Installing Harness System
1. Insert Buckle’s
Metal Retainer into
Slot Closest to Child
Buckle MUST face out.
You MUST use the 1st
or 2nd buckle slots
when child restraint is
used rear facing. Any slot can be used
when forward facing.
3. Check Buckle
Pull up on buckle
to make sure it is
secured.
The buckle MUST not
pull out.
2. Pull Metal
Retainer
Completely
Through Pad
and Shell
1
2
3
continued on next page
If you will be
using the lowest
shoulder harness
slots, see pages
10-14.
Otherwise, continue
on to step 1.
7. Thread Buckle
and Chest Clip
Harness strap ends
go through the back
of buckle tongues
and through the chest
clip front to back as
shown.
6. Make Harness
Strap Even
Sewn ends of
harness strap loops
MUST face each
other.
5. Pull Harness
Strap Across
Bottom of Shell
Harness strap MUST
lie in front of harness
adjustment strap as
shown. Push harness
strap up through
other hip harness
slot.
4. Rethread Harness
Strap
With sewn end of
harness strap loop
facing the buckle,
thread harness strap
down through hip
harness slot.