User Manual

15 16
Securing Child in Child Restraint
1. Place Child in
Child Restraint
The child’s bottom
and back should be
flat against the child
restraint.
Position harness strap over child’s
shoulders and upper thighs.
2. Buckle Harness
Push buckle tongues
into buckle until you
hear a “click.”
Pull up on harness
strap to make sure
buckle is locked.
3. Close Chest Clip
Insert right half
of chest clip into
left half and snap
together.
4. Tighten Harness
Pull on harness
adjustment strap
to tighten harness
snugly.
continued on next page
5. Position Chest
Clip
The chest clip must
be placed at mid-
chest (even with
armpits) and away
from the child’s neck.
6. Check Harness
Tightness
Try to pinch the
harness at the
shoulders vertically
between index finger
and thumb as shown.
If your fingers slip off, the harness is
tight enough.
If you can pinch the harness strap,
tighten more. The harness strap should
be snug throughout its length.
A snug strap should not allow any slack.
It lies in a relatively straight line without
sagging. It does not press on the child’s
flesh or push the child’s body into an
unnatural position.