Installation Manual

15
16
C. Basic Use
Check Harness
With child in the child
restraint, check the location
of the harness slot.
Follow the guidelines below
to determine the correct
harness height.
6.
Rear-Facing Position
Harness slot must be even
with or just below the
shoulders.
If the lowest harness slot is
above the child’s shoulders,
do not use this child restraint.
Forward-Facing Position
Harness slot must be even
with or just above the
shoulders.
If the highest harness slot is
below the child’s shoulders, do
not use this child restraint.
To Change Harness
Location
With harness system loose,
from the back, remove
harness from the splitter
plate.
7.
From the front of child
restraint, pull harness
straps out.
a.
Rethread harness into
new harness slot location.
Make sure harness straps
do not twist.
b.
Fit loops on harness ends
completely on the splitter
plate.
NOTE: Make sure sewn
end of the harness strap
loop faces towards you.
c.
Using the Lowest
Harness Slots
When using the lowest
slots, you MUST move the
harness’s metal retainer
to the inside position. This
will allow a proper fit for
the lowest harness slot
use.
a.
Rotate the child restraint
over and locate both metal
retainers.
b.
Meijer.com