Installation Manual

43
44
F. Installing Forward-Facing
F-4 Install Forward-Facing
With LATCH
Note: Review your vehicle’s owner manual for LATCH belt use.
Do not use the LATCH system along with the
vehicle belt.
Check LATCH belt before each use. Use only if
the belt can be tightened properly and securely.
Failure to follow these warnings can result in
serious injury or death.
1.
Place Child Restraint in
the Back Seat
Forward-Facing
Place child restraint flush
against the vehicle seat
back forward-facing.
Installation Tip:
Loosely attach the
tether hook before
attaching the
LATCH belt. Consult
vehicle’s owner
manual for specific
location.
2.
Hook LATCH to
Vehicle Anchor
Fasten one LATCH belt
hook to the anchor in
the vehicle seat located
in the vehicle seat bight.
Repeat for other side of
child restraint.
continued on next page.
Tighten Top
Anchorage Strap
(Tether)
Push firmly on the back
of the child restraint and
tighten top anchorage
strap (tether).
4.
Tighten LATCH Belt
Place knee in the child
restraint. Push down
firmly while pulling up on
the loop to tighten LATCH
belt.
3.
It maybe easier to tighten
the LATCH belt through
the belt path opening as
shown.
Meijer.com