User guide

INSTALLATION, OPERATION AND MAINTENANCE MANUAL – COSA 9610™
Page 12 of 44
2. INSTALLATION
2.1. GENERAL
Upon receipt and unpacking of the COSA 9610™ a visual inspection must be carried out
to check for any visual damage, caused by transport. Any damage must be reported
immediately to:
COSA INSTRUMENT CORPORATION
New Jersey Office:
Texas Office:
55 Oak Street
7125 North Loop East
Norwood, NJ 07648
Houston, TX 77028
Tel: [phone]
Tel: [phone]
Fax: [phone]
Fax: [phone]
New York Office:
E-mail:
84G Horseblock Rd.
[e-mail]
Yaphank, NY 11980
Tel: [phone]
Fax: [phone]
We kindly ask you to submit photographs of the damage.
If the COSA 9610™ is supplied by the COSA INSTRUMENT CORPORATION, as part of a
complete package and built into a shelter or house, installation may differ from
hereunder described.
2.2. STORAGE
The COSA 9610™ must be stored frost-free and at a maximum temperature of 122ºF
(50°C), preferably in it’s original packing, and protected against direct sunlight and (rain)
water.
2.3. PLACEMENT
2.3.1. General
The COSA 9610™ can operate under ambient conditions between +41º F (5°C) and
+113ºF (45°C) and a maximum humidity of 90%.