User guide
Chapter 2
THE
CORVUS MIRROR
Connecting the Mirror
to
the Corvus Disk
If you have a drive that contains a Mirror, then you need only
connect the video cable. For directions on how
to
connect
your
video
cable, see
the
section below labeled 'Video Cable.'
If
you order a
Mirror
to complement
an
already existing Corvus
system, the
Mirror
is packaged in its own box complete
with
installation instructions.
Video
Cable
You
received a phono plug set with your Mirror. For built-in
Mirrors, connect this cable to the drive cabinet backpanel and
to
the VCR.
The VIDEO OUT
connector
on Mirror or drive cabinet connects
to the
VIDEO
IN
connector
on the VCR. The VIDEO
IN
connector
on
the
Mirror
or
drive cabinet connects to the VIDEO OUT
connector
on
the VCR.
See figure: Video cables connected to drive cabinet back panel.
2-1