User guide
THE MIRROR WITH CP/M
The standard single user version
of
the CP/M
Mirror
utility
program contains its own Corvus disk driver. Thus, it can be run
from diskette based systems that are not yet interfaced
to
the
Corvus drive.
To
use the utility, load the Mirror program
as
you
would
any
other.COM
file. Type: MIRROR
<return>.
A
Mirror
menu displays:
In
CP/M based systems, each drive is divided into one
or
more
large volumes, usually two. Volumes may be any size, up
to
8MB. If
two volumes are same size, it is possible
to
restore
an
image
of
one
volume onto the other. The starting disk address and
number
of
blocks must be specified.
When you restore
an
image
of
a volume, all the attributes
of
that
image are
placed on the disk, including the name
of
the volume as
it was stored in that image.
(I.e.,
the volume directory is copied
along with the files.)
LIST THIS MENU and LIST HELP
DATA
Press L to list the MIRROR menu.
Press H
to
LIST HELP DATA. HELP DATA displays a
brief
description for BACKUp, IDENTIFY, and RESTORE. HELP DATA
also gives a brief overall explanation
of
the MIRROR
utility
with
CP/M.
2-6