User guide

. Appendix D
Description of Corvus Utilities Programs
1. INDEX.DOC
2. CERROR.DOC
3. PUTGET.COM
4. CLlNK2FV.COM
CLlNK2TN.COM
CLINK2TW.COM
CLlNK7FV.COM
CLlNK7TN.COM
CLlNK7TW.COM
5. CDIAGNOS.COM
CDIAGNOS.DOC
6. CORVB173.CLR
7. MIRROR.COM
8. SEMA4.COM
This is the disk index document file.
This is a short document file listing
the
controller error codes.
This is a disk utility that can
be used under
CP/M to read and write from memory to the
Corvus drive
as well as fill various sections
of the disk with data. The routine has its own
disk drivers and is mainly useful
as a
SYSGEN routine to write a configured
CP/M
2.X system out to the drive, and to
initialize a drive directory.
These are several versions of the Corvus
link program.
You should choose the one
that best meets
your needs, and ignore
the others.
Consult the CORVUS SYSTEMS
CP/M USERS GUIDE for descriptions of
each program. This program contains the
Corvus disk drivers that are linked into
CP/M. These programs will
only work with
CP/M version
2.0 or later.
A disk diagnostic that can
be used to verify
correct drive operation
as well as to update
the controller code and change other drive
parameters.
This is a controller code
file for use with
CDIAGNOS.COM. This is a copy of version
17.3 of the controller code for the REV 8
controller.
This program is the control program
for the
Corvus Mirror disk backup system.
It will
not work under Version 0 of the controller
code (REV A drives).
This is an example program designed to
illustrate how to access the semaphores
supported on the Corvus drive.
53